Table of Contents
Advertisement
®
R&S
ZNB/ZNBT
CALCulate<Ch>:PARameter:CATalog?
CALCulate<Ch>:PARameter:CATalog:SENDed?
CALCulate<Ch>:PARameter:MEASure
CALCulate<Ch>:PARameter:MEASure:SENDed
CALCulate<Ch>:PARameter:SDEFine
CALCulate<Ch>:PARameter:SDEFine:SENDed
CALCulate<Ch>:PARameter:SELect
CALCulate<Ch>:PARameter:CATalog?
Returns the trace names and measurement parameters of all traces assigned to a par-
ticular channel.
The result is a string containing a comma-separated list of trace names and measure-
ment parameters, e.g. 'CH4TR1,S11,CH4TR2,S12'. The measurement parameters
are returned according to the naming convention of
SDEFine. The order of traces in the list reflects their creation time: The oldest trace is
the first, the newest trace is the last trace in the list.
Suffix:
<Ch>
Example:
Usage:
CALCulate<Ch>:PARameter:CATalog:SENDed?
Returns the trace names and measurement parameters of all traces assigned to a par-
ticular channel.
Similar to CALCulate<Ch>:PARameter:CATalog?, but in presence of balanced
ports this command distinguishes between
●
single-ended S-parameters for logical ports (SSS<Li><Lj>)
●
"raw" single-ended S-parameters referring to physical ports (S<Pi><Pj>)
Suffix:
<Ch>
Usage:
User Manual 1173.9163.02 ─ 62
.............................................................................968
............................................................... 968
.................................................................. 969
................................................................................970
.................................................................................971
.......................................................................971
................................................................ 971
...........................................................................971
.................................................................. 971
............................................................................ 972
............................................................... 972
............................................................................. 973
................................................................975
................................................................................ 976
.
Channel number. If unspecified the numeric suffix is set to 1.
CALC4:PAR:SDEF 'Ch4Tr1', 'S11'
Create channel 4 and a trace named Ch4Tr1 to measure the
input reflection coefficient S
CALC4:PAR:CAT?
Query the traces assigned to channel 4. If Ch4Tr1 is the only
trace assigned to channel 4, the response is 'CH4TR1,S11'.
Query only
.
Channel number. If unspecified the numeric suffix is set to 1.
Query only
Command reference
SCPI command reference
CALCulate<Ch>:PARameter:
.
11
968
Advertisement
Chapters
Table of Contents
