R&S ZNB Series User Manual page 40

®
R&S ZNB/ZNBT
3.2.1.1 Touchscreen
The analyzer is equipped with a 12.1'' XGA color touchscreen. The touchscreen pres-
ents all measurement results, mostly in the form of diagrams. Besides, all instrument
functions can be accessed and operated by tapping the control elements on the touch-
screen. For an introduction to touchscreen operation, refer to
operation",
The following sections contain further useful information about manual control of the
instrument.
●
Refer to the other sections in chapter
on page 51 to learn how to handle traces and diagrams, and how to use menus,
keys and softtools.
●
Refer to
information about the results in the diagram.
●
Refer to section
tomize the screen.
●
Refer to the data sheet for the technical specifications of the display.
Screen saver
The screen saver function of the operating system can be used to switch off the display
if the analyzer receives no command for a selectable period of time. The display is
switched on again if any front panel key is pressed.
To enable the screen saver, access the Windows
the Windows key in the SYSTEM keypad) and tap "Control Panel > Power Options >
Change Plan Settings > Turn off the display".
(Windows 7: "Control Panel > Hardware and Sound > Power Options > Edit Plan Set-
tings > Turn off the display").
3.2.1.2 Function keys
Most of the keys in the TRACE, CHANNEL, STIMULUS, and SYSTEM keypads call up
a related softtool of the analyzer GUI. Every softtool provides access to a group of rela-
ted measurement settings.
The TRACE keys give access to all trace settings, to the limit check settings, and to
the marker functions including marker search.
●
The [MEAS] settings select the measured and displayed quantity.
●
The [FORMAT] settings define how measured data (traces) are presented.
●
The [SCALE] settings define how traces are scaled.
●
The [TRACE CONFIG] settings store traces to the memory and perform mathemat-
ical operations on traces.
●
The [LINES] settings define limits for the measurement results, visualize them in
the diagrams and activate/deactivate the limit check.
User Manual 1173.9163.02 ─ 62
on page 52.
Chapter 4.2.1, "Display elements of a
Chapter 5.17, "Display
Chapter 3.3.1, "Manual
Chapter 3.3, "Operating the
diagram", on page 102 to obtain
softtool", on page 735 to learn how to cus-
®
operating system (e.g. by pressing
Getting started
Instrument tour
instrument",
40