R&S ZNB Series User Manual page 585

®
R&S ZNB/ZNBT
Access: Channel – [Channel Config] > "Intermod" > "Intermod Wizard..."
The wizard proceeds in 4 steps:
1. Configure intermodulation measurement. Refer to
on page 582.
2. Define the (frequency or power) sweep ranges for the lower tone. Refer to
ter 5.12.4.4, "Frequencies and Power
User Manual 1173.9163.02 ─ 62
Channel Config softtool
Chapter 5.12.4, "Intermod.
dialog", on page 591.
GUI reference
tab",
Chap-
585