R&S ZNB Series User Manual page 35

®
R&S ZNB/ZNBT
3.1.12 Remote operation in a LAN
A LAN connection is used to integrate the analyzer into a home/company network.
LAN connectivity offers several applications, e.g.:
●
Transfer data between a controller and the analyzer, e.g. to run a remote control
program.
●
Control the measurement from a remote computer using Remote Desktop or a sim-
ilar application.
●
Use external network devices (e.g. printers).
The analyzer uses a user name and password as credentials for remote access; see
note on
analyzer from unauthorized access, it is recommended to change the factory setting.
3.1.12.1 Assigning an IP address
Depending on the network capacities, the TCP/IP address information for the analyzer
can be obtained in different ways.
●
If the network supports dynamic TCP/IP configuration using the Dynamic Host
Configuration Protocol (DHCP), all address information can be assigned automati-
cally.
●
If the network does not support DHCP, or if the analyzer is set to use alternate
TCP/IP configuration, the addresses must be set manually.
By default, the analyzer is configured to use dynamic TCP/IP configuration and obtain
all address information automatically. Hence it is safe to establish a physical connec-
tion to the LAN without any previous analyzer configuration.
Manual TCP/IP configuration
If your network does not support DHCP, or if you choose to disable dynamic TCP/IP
configuration, you must assign valid address information before you connect the ana-
lyzer to the LAN. Contact your network administrator to obtain a valid IP address,
because connection errors can affect the entire network.
Admin account
You need administrator rights to change the TCP/IP configuration. See note on
accounts and password protection"
The R&S ZNBT provides a miniature display in the upper right-hand corner of the front
panel indicating the current IP address of the instrument. See
To enter the TCP/IP address information manually
1. Obtain the IP address and subnet mask for the analyzer and the IP address for the
local default gateway from your network administrator. If necessary, also obtain the
User Manual 1173.9163.02 ─ 62
"User accounts and password protection" on page 30 for details. To protect the
on page 30 for details.
Getting started
Preparing for use
"User
Mini display.
35