Calculate<Chn>:Eye:mask:fail - R&S ZNB Series User Manual

®
R&S ZNB/ZNBT
Example:
Usage:
Options:
Manual operation:
CALCulate<Chn>:EYE:MASK:FAIL?
Returns 'Pass' or 'Fail' to indicate the result of the limit check in the related eye
diagram.
This command will raise an execution error if the active trace in the selected channel is
not an eye diagram, if the eye test is not enabled
STATe
late<Chn>:EYE:MASK:SHAPe:BOTTom|TOP|POLYgon:STATe.
Tip
●
Use
●
The result is automatically recalculated whenever a relevant setting is changed, i.e.
a subsequent query will return the updated mask test result
Suffix:
<Chn>
User Manual 1173.9163.02 ─ 62
CALCulate1:EYE:MASK:DATA?
returns something like
'Eye Mask
------------------------------
Fail Condition Type Samples
Violation Tolerance 1
Total Number of Samples 10342
Mask 1 (Top) Active
Samples Hits 366
Fail Rate 3.539 %
Test Result Fail
Mask 2 (Bottom) Not Active
Samples Hits ------
Fail Rate ------
Test Result ------
Mask 3 (Octagon) Not Active
Samples Hits ------
Fail Rate ------
Test Result ------
'
Query only
R&S ZNB/ZNBT-K20
See "Mask Test On"
ON), or if the mask is empty (see
CALCulate:CLIMits:FAIL?
.
Channel number used to identify the active trace
SCPI command reference
on page 703
(CALCulate<Chn>:EYE:MASK:
CALCu
to perform a composite (global) limit check
Command reference
872