R&S ZNB Series User Manual page 38

®
R&S ZNB/ZNBT
At the R&S ZNB/ZNBT, by default remote connections are enabled using a local group
policy and remote access is granted to users instrument and administrator.
For detailed information about Remote Desktop and the connection, refer to the Win-
dows
To establish a remote desktop connection, proceed as follows:
1. Connect remote Windows PC and VNA to the LAN and make sure that an IP con-
nection can be established.
2. At the remote Windows PC, open a remote desktop connection (type Remote
Desktop Connection at the Windows Start/Search menu and hit enter).
3. In the "Remote Desktop Connection" dialog, enter the VNA's computer name or IP
address and select "Connect"
If no external monitor is connected at the time you log in to the instrument via remote
desktop, Windows
This message can be safely ignored.
3.1.12.4
Windows
A firewall protects an instrument by preventing unauthorized users from gaining access
to it through a network. In the default configuration of the R&S ZNB/ZNBT, the firewall
is enabled. A remote desktop connection does not require any changes in the firewall
settings.
Admin account
You need administrator rights to change the firewall settings. See note on
accounts and password protection"
Some actions require a different firewall configuration, e.g.:
●
To transfer data with other hosts in the LAN, you have to allow "File and Printer
Sharing".
To change the firewall settings, proceed as follows:
1. Access the operating system by pressing the Windows
board. Open the "Control Panel".
2. Select "Windows Defender Firewall"
User Manual 1173.9163.02 ─ 62
® Help ("Windows Start Menu > Help and Support").
®
possibly displays the following error message:
®
firewall settings
on page 30 above for details.
Getting started
Preparing for use
"User
®
key on the external key-
38