R&S ZNB Series User Manual page 292

®
R&S ZNB/ZNBT
Furthermore, provides functions for renumbering the logical ports.
Remote command:
SOURce<Ch>:LPORt<LogPt>
SOURce<Ch>:LPORt<LogPt>:CLEar
Reference Impedance tab
The "Reference Impedance" tab of the "Balanced Ports" dialog allows you to define (or
redefine) the impedances of the logical ports.
Background information
Refer to
Figure 5-1: Reference Impedance Tab (4 physical ports)
Figure 5-2: Reference Impedance Tab (>4 physical ports)
User Manual 1173.9163.02 ─ 62
Chapter 4.3.2, "Reference impedances", on page 128.
GUI reference
Meas softtool
292