R&S ZNB Series User Manual page 70

®
R&S ZNB/ZNBT
is a standard procedure known from other Windows
various other ways to enter data.
3.3.6.1 Using front panel keys
On a R&S ZNB you can use the keys in the data entry keypad to enter numbers, units,
and characters.
To enter a numeric value:
1. Select a numeric data input field to activate it.
2. Press the data entry keys.
●
●
●
●
To enter a character string:
1. Tap a character data input field to activate it.
2. Press the data entry keys as if you were writing a short message on your mobile
phone.
●
●
●
●
●
●
User Manual 1173.9163.02 ─ 62
Use [0] to [9] to enter the corresponding numbers.
Use [.] to enter a decimal point.
Use [-] to change the sign of the value.
Use [G/n], [M/μ], [k/m], or [x1] to multiply the entered value with factors of 10
(-)6 (-)3
10 , 10 or 1 and to add the appropriate physical unit.
Use [0] to [9] to enter the corresponding numbers.
Use [.] and [-] to enter a dot or hyphen.
Use Use [G/n], [M/μ], or [k/m] to enter the letters G, M or K (case-insensitive).
Use the key to correct wrong entries, deleting the character to the left of the
current cursor position.
Press to complete an entry.
Press [Esc] to discard the entries made.
Getting started
Operating the instrument
®
applications. However, there are
(-)9 ,
70