R&S ZNB Series User Manual page 771

®
R&S ZNB/ZNBT
Last Calibration
The last date (and time) the instrument was calibrated.
Typically set by Rohde&Schwarz service.
Remote command:
DIAGnostic:SERVice:CALibration:DATE
5.18.1.4 Operators Check wizard
Welcome page
The "Operators Check" wizard allows you to perform selftests and other helpful checks
from one central place in the analyzer GUI. The start page of the wizard is the selec-
tion page for the checks, its final page is the summary of all selected and executed
checks.
Recall
Allows you to load an operators check definition from an existing "OperatorsCheck
XML" (*.opch) file. Such a file can be created with the
Check" wizard.
Save
Saves the current "Operators Check" definition to a "OperatorsCheck XML" (*.opch)
file.
Note that if the "Operators Check" definition uses custom settings, then the opch file
possibly references external files. E.g., for
generated "OperatorsCheck XML" file <filename>.opch references external limit
line files <filename>_opch<i>.line. To be able to recall the operator check defini-
tion, keep all these files in one directory and do not rename the external files.
User Manual 1173.9163.02 ─ 62
Save function of the "Operators
power checks with custom limit lines, the
GUI reference
Setup softtool
771