R&S ZNB Series User Manual page 770

®
R&S ZNB/ZNBT
Service tab
Allows you to read or specify service-related information. This information can be read
via R&S
ZNBT-K980.
Next Calibration Due
The date (and time) the instrument needs calibration to be done.
Remote command:
DIAGnostic:SERVice:CALibration:DUE:DATE
Recommended Calibration Interval
Queries the recommended calibration interval, set by Rohde&Schwarz service.
Remote command:
DIAGnostic:SERVice:CALibration:INTerval?
Last Service
The last date (and time) the instrument was serviced.
Typically set by Rohde&Schwarz service.
Remote command:
DIAGnostic:SERVice:DATE
User Manual 1173.9163.02 ─ 62
HUMS, however, it does not require the corresponding option R&S ZNB/
GUI reference
Setup softtool
770