R&S ZNB Series User Manual page 726

®
R&S ZNB/ZNBT
Access:
Mixer Configuration dialog
The "Mixer Configuration" dialog allows you to set up the fundamental properties of a
mixer.
Access:
The DUT type "Mixer" is only availble if the instrument is equipped with software
optionR&S ZNB/ZNBT-K4. See
on page 236.
Most of the mixer properties are straight-forward
User Manual 1173.9163.02 ─ 62
DUT Manager dialog > "Edit..." with a DUT of type "Amplifier" selected
DUT Manager dialog > "Edit..." with a DUT of type "Mixer" selected
Chapter 4.7.4, "Frequency conversion
GUI reference
Applic softtool
measurements",
726