Table of Contents
Advertisement
®
R&S
ZNB/ZNBT
CALCulate:PARameter:DELete:ALL
Deletes all traces in all channels of the active recall set, including the default trace
Trc1 in channel 1. The manual control screen shows "No Trace".
Example:
Usage:
Manual operation:
CALCulate<Ch>:PARameter:DELete:CALL
Deletes all traces in channel no. <Ch>.
Suffix:
<Ch>
Example:
Usage:
Manual operation:
CALCulate<Ch>:PARameter:DELete:CMEMory
Deletes all memory traces in channel <Ch>.
Suffix:
<Ch>
Usage:
CALCulate:PARameter:DELete:MEMory
Deletes all memory traces in all channels.
Usage:
Manual operation:
CALCulate<Ch>:PARameter:DELete:SGRoup
Deletes a group of logical ports (S-parameter group), previously defined via
CALCulate<Ch>:PARameter:DEFine:SGRoup.
Suffix:
<Ch>
Example:
Usage:
User Manual 1173.9163.02 ─ 62
See
CALCulate<Ch>:PARameter:DELete
Event
See
"Delete Trace"
on page 335
.
Channel number
See
CALCulate<Ch>:PARameter:DELete
Event
See
"Delete Trace"
on page 335
.
Channel number
Event
Event
See
"Delete All Mem"
on page 342
.
Channel number. <Ch> may be used to reference a previously
defined channel. If <Ch> does not exist, it is generated with
default channel settings.
See
CALCulate<Ch>:PARameter:DEFine:SGRoup
Event
Command reference
SCPI command reference
971
Advertisement
Chapters
Table of Contents
