®
R&S
ZNB/ZNBT
Remote command:
MMEMory:LOAD:CABLe
5.16.4.3
Fault List dock widget
The "Fault List" dock widget allows you to explore and save all peaks that violate the
active
Access: [Trace] > "Distance to Fault" > "Fault List..."
Figure 5-86: Fault List Dock Widget
Fault Table
The displays a list of all peaks that violate the active
abled (see
Remote command:
CALCulate<Chn>:TRANsform:DTFault:PEAK:COUNt?
CALCulate<Chn>:TRANsform:DTFault:PEAK:DATA<FaultNo>
Contents
Allows you to filter the
●
"All Channels" (default)
The table displays the faults of all Distance to Fault traces in the current recall set.
●
"Active Channel"
The table displays the faults of all Distance to Fault traces in the active channel (if
any).
●
"Active Trace"
The table displays the faults of the active trace (in case it is a Distance to Fault
trace) .
User Manual 1173.9163.02 ─ 62
Fault
Limit.
"Tracking Enabled"
Fault
Table:
Fault
on page 735), the table is updated with every sweep.
GUI reference
Applic softtool
Limit. Unless tracking is dis-
734