R&S ZNB Series User Manual page 306

®
R&S ZNB/ZNBT
Remote command:
CALCulate<Ch>:PARameter:MEASure
"Z-S12SER" | "Z-S12PAR" | ...
CALCulate<Ch>:PARameter:SDEFine
"Z-S12SER" | "Z-S12PAR" | ...
CALCulate<Ch>:PARameter:MEASure
'SHUNT-S13 | ... | 'SHUNT-S21' | 'SHUNT-S23' | ...
CALCulate<Ch>:PARameter:SDEFine
'SHUNT-S13 | ... | 'SHUNT-S21' | 'SHUNT-S23' | ...
Balanced Ports...
Opens a dialog to configure the logical ports of the analyzer.
See
5.2.6 Y←Sij tab
Selects converted admittances as measured quantities. The admittances are calcula-
ted from the measured S-parameters.
Background information
Refer to the following sections:
●
Chapter 4.3.4, "Admittance
●
Chapter 4.3.4.1, "Converted
Y←S<out><in> selector
Selects a
For an n-port vector network analyzer, the pull-down list provides the full set of n
admittance parameters.
Converted admittance parameters are expressed as Y←S
<in> denote the output and input port numbers of the DUT.
User Manual 1173.9163.02 ─ 62
Chapter 5.2.1.3, "Balanced Ports
converted admittance
"<Trace_Name>", "Z-S12" |
"<Trace_Name>", "Z-S12" |
"<Trace_Name>", 'SHUNT-S12' |
"<Trace_Name>", 'SHUNT-S12' |
dialog", on page 289.
parameters", on page 134
admittances", on page 134
parameter as a measured quantity for the active trace.
GUI reference
Meas softtool
2
, where <out> and
<out>< in>
306