R&S ZNB Series User Manual page 355

®
R&S ZNB/ZNBT
5.5.7 Distance to Fault tab
This tab is only visible, if option K3 is installed on the R&S ZNB/ZNBT. It replicates the
"Distance to Fault" tab of the "Distance to Fault" application. See
tance to Fault
5.5.8 Trace Statistics tab
Evaluates statistical and phase information of the entire trace or of a specific evalua-
tion range and calculates the x-dB compression point.
5.5.8.1 Controls on the Trace Statistics tab
The "Evaluation Range..." button opens the "Evaluation Range" dialog (see
ter 5.5.8.2, "Evaluation Range
The "Decimal Places..." button opens the "System Config" dialog to define the (maxi-
mum) number of fractional digits for setting values and measurement results. See also
"User Interface tab"
Min/Max/Peak-Peak, Mean/Std Dev/RMS
The upper two softkeys in the "Trace Statistics" tab display or hide groups of statistical
results. The values are based on all response values of the trace in the selected evalu-
ation range ("Evaluation Range...").
User Manual 1173.9163.02 ─ 62
Application", on page 727.
dialog",
on page 755..
on page 360).
GUI reference
Trace Config softtool
Chapter 5.16.4, "Dis-
Chap-
355