R&S ZNB Series User Manual page 473

®
R&S ZNB/ZNBT
Add
Adds a new system error correction.
The "Add" button opens the
Delete
Deletes the selected calibration from the list of configured calibrations.
Modify
Edits the selected system error correction: opens the
corresponding ports and calibration type pre-selected.
Next
Proceeds to
Inactive as long as no calibration is defined.
Define Calibration dialog
you to select the test ports to be calibrated and the calibration type to be used.
Background information
Refer to
Access:
ify"
User Manual 1173.9163.02 ─ 62
Define Calibration dialog
Step 2: Connectors and Cal
Chapter 4.5.1, "Calibration
Calibration Setting wizard (MultiCal)
without pre-selected ports.
Define Calibration dialog
Kits.
types", on page 163 for background information.
> Step 1: Ports and
GUI reference
Cal softtool
with the
Type> "Add" / "Mod-
473