R&S ZNB Series User Manual page 744

®
R&S ZNB/ZNBT
Element
Selects the diagram element to be modified. The list contains the background and all
traces (more precisely trace properties), text elements and lines in the diagrams.
The maximum number of trace properties can be configured in the "User Interface" tab
of the "System Config" dialog (see
Remote command:
The <DispEl> suffix in the DISPlay:CMAP<DispEl>... commands identifies the
screen element. See DISPlay:CMAP<DispEl>:RGB.
Properties
Configures the selected screen element.
●
"Color" opens a standard color dialog where you can assign a color to the selected
element.
●
"Trace Line Style" and "Trace Line Width" are enabled if the selected element is a
trace.
Remote command:
Display color scheme only!
DISPlay:CMAP<DispEl>:RGB
DISPlay:CMAP:TRACe:RGB
Limit Test > Show Limit Fail Symbols
Displays or hides the colored squares on the trace indicating failed measurement
points. Hide the squares if they cover too much of the trace. Instead of using the limit
fail symbols, you can colorize the trace to highlight failed trace sections.
Remote command:
Display color scheme only!
DISPlay:CMAP:LIMit:FSYMbol[:STATe]
Limit Test > Colorize Trace when Failed
Assigns a different trace color to failed trace segments.
User Manual 1173.9163.02 ─ 62
"Number of Trace Colors"
GUI reference
Display softtool
on page 756).
744