R&S ZNB Series User Manual page 641

®
R&S ZNB/ZNBT
5.13.6 Port Sets tab
Selects transformation networks for deembedding/embedding arbitrary port sets,
defines their parameters, assigns them to a port set and enables embedding.
Use the complementary dock widget to create the required port sets and to activate or
deactivate dembedding/embedding for selected port sets (see
Sets
Background information
Refer to
"Port set
If the "Fixture Simulator" is disabled for the related channel (see
on page 549), this tab is inactive, i.e. all controls except the "Overview" button are
grayed out.
Overview
See
Type
Switches between "Deembedding" and "Embedding" network definition.
Port Set
Port sets, defined in the complementary
formation networks are defined such that the physical analyzer test ports are connec-
ted to the left of the circuit; the DUT ports are on the right side. You can define inde-
pendent transformation networks for all port sets.
The port set number, i.e. the number at the beginning of each "Port Set" item, corre-
sponds to the position of the port set in the
User Manual 1173.9163.02 ─ 62
panel", on page 609).
Chapter 4.6.2.5, "Port pair
de-/embedding", on page 214.
"Overview" on page 616.
de-/embedding", on page 213 and
Port Sets panel dock widget panel. The trans-
Port Sets panel.
GUI reference
Offset Embed softtool
Chapter 5.13.1.4, "Port
Chapter 4.6.2.6,
"Fixture Simulator"
641