Calculate<Chn>:Marker<Mk>:Function:domain:user[:Range]; Calculate<Chn>:Marker<Mk>:Reference:function:domain:user[:Range]; Calculate<Chn>:Marker<Mk>:Reference:function:domain:user:show - R&S ZNB Series User Manual

®
R&S ZNB/ZNBT
CALCulate<Chn>:MARKer<Mk>:FUNCtion:DOMain:USER[:RANGe]
CALCulate<Chn>:MARKer<Mk>:REFerence:FUNCtion:DOMain:USER[:RANGe]
Assigns search range no. <NumSearchRange> to the related marker (marker <Mk> or
the reference marker of channel <Chn>'s active trace).
Selects the search range, e.g. to display range limit lines or define the start and stop
values.
Suffix:
<Chn>
<Mk>
Parameters:
<NumSearchRange> Number of the search range.
Example:
Manual operation:
CALCulate<Chn>:MARKer<Mk>:FUNCtion:DOMain:USER:SHOW <Boolean>
CALCulate<Chn>:MARKer<Mk>:REFerence:FUNCtion:DOMain:USER:SHOW
Displays or hides range limit lines for the search range selected via
CALCulate<Chn>:MARKer<Mk>:FUNCtion:DOMain:USER[:RANGe]
CALCulate<Chn>:MARKer<Mk>:REFerence:FUNCtion:DOMain:USER[:
RANGe]
Suffix:
<Chn>
<Mk>
Parameters:
<Boolean>
Example:
Manual operation:
User Manual 1173.9163.02 ─ 62
<NumSearchRange>
.
Channel number used to identify the active trace
Marker number (ignored for reference markers)
Range:
*RST:
CALC1:MARK1:FUNC:DOM:USER 2
Select the search range no. 2, assigned to marker no. 1 and
trace no. 1.
CALC:MARK:FUNC:DOM:USER:STARt 1GHz
Set the start frequency of the search range to 1 GHz.
CALC:MARK:FUNC:DOM:USER:STOP 1.2GHz
Set the stop frequency of the search range to 1.2 GHz.
See "Search Range"
.
.
Channel number used to identify the active trace
Marker number (ignored for reference markers)
ON | OFF - range limit lines on or off.
*RST:
See
CALCulate<Chn>:STATistics:DOMain:USER
See "Range Limit Lines On"
0 to 10 where 0 refers to the fixed full span search
range (equal to the sweep range) and 1 to 10 refer
to user-definable search ranges; see example.
0 (reserved for full span search range)
on page 399
OFF
on page 400
Command reference
SCPI command reference
or
949