®
R&S
ZNB/ZNBT
This dialog is available with
K20 only.
Active
Enables/disables noise insertion.
Remote command:
CALCulate<Chn>:EYE:NOISe:STATe
RMS
Defines the root mean square noise level.
Remote command:
CALCulate<Chn>:EYE:NOISe:RMS
DUT
The "Define DUT" dialog allows you to switch between different transmission (and
reflection) paths of the DUT and to configure its DC properties. In addition, it allows
you to switch between the real DUT (with measured frequency response) and an ideal
one (with flat frequency response), which can be useful when configuring the other eye
diagram blocks (see
Access: "DUT" button in the
This dialog is available with
K20 only.
User Manual 1173.9163.02 ─ 62
Extended time domain analysis
Chapter 5.16.2.6, "Advanced Settings
Advanced Settings dialog
Extended time domain analysis
GUI reference
Applic softtool
option R&S ZNB/ZNBT-
dialog",
on page 695).
option R&S ZNB/ZNBT-
701