Table of Contents
Advertisement
®
R&S
ZNB/ZNBT
Return values:
<TestResults>
Usage:
Options:
Manual operation:
CALCulate<Chn>:EYE:MASK:FAIL:BEEP <Boolean>
Deprecated command: Since version 3.45, generating sounds is no longer supported
by the analyzer firmware.
Defines whether the R&S ZNB/ZNBT should make an audible beep on mask failures in
the related eye diagram.
This command will raise an execution error if the active trace in the selected channel is
not an eye diagram.
Suffix:
<Chn>
Parameters:
<Boolean>
Options:
CALCulate<Chn>:EYE:MASK:FAIL:CONDition <FailCondition>
Defines whether the fail condition for the eye mask test of the related eye diagram is
specified in absolute or relative terms.
This command will raise an execution error if the active trace in the selected channel is
not an eye diagram.
Suffix:
<Chn>
Parameters:
<FailCondition>
Options:
Manual operation:
User Manual 1173.9163.02 ─ 62
Query only
R&S ZNB/ZNBT-K20
See
"Mask Test On"
on page 703
.
Channel number used to identify the active trace
*RST:
OFF
R&S ZNB/ZNBT-K20
.
Channel number used to identify the active trace
SAMPles | RATE
SAMPles: The eye mask test will fail if a configurable number of
samples violate the mask (see
VIOLation:TOLerance).
RATE: The eye mask test will fail if the share of the samples vio-
lating the mask is higher than a configurable percentage (see
CALCulate<Chn>:EYE:MASK:VIOLation:RATE).
*RST:
SAMPles
R&S ZNB/ZNBT-K20
See
"Test Settings"
on page 706
Command reference
SCPI command reference
CALCulate<Chn>:EYE:MASK:
873
Advertisement
Chapters
Table of Contents
