R&S ZNB Series User Manual page 659

®
R&S ZNB/ZNBT
Depending on the selected DUT, a different set of test coupon types is supported.
Test coupon
ISD
SFD
EZD
Depending on the selected test coupon type, the number of logical ports and the
graphical representation changes:
Test coupon type
"Sym 2x Thru"
"1x Open"
"1x Short"
Use the
required for the measurements.
There are several rules to be considered with the coupon measurement interface.
●
The port selection drop-down allows you to select from any available port of the
correct type on the instrument.
User Manual 1173.9163.02 ─ 62
"Sym 2x Thru"
☑
☑
☑
Single-ended
Balanced Ports dialog
"1x Open" "1x Short"
☑ ☑
☑ ☑
⃞ ⃞
to create the single ended and balanced ports that are
GUI reference
Offset Embed softtool
"1x Open, 1x
Short"
☑
⃞
⃞
Balanced
659