R&S ZNB Series User Manual page 33

®
R&S ZNB/ZNBT
3.1.11.2 Connecting a keyboard
A keyboard can be connected to any of the USB connectors. After being auto-detected
by the operating system, it can safely be disconnected and reconnected even during
measurements.
Keyboard configuration
The default input language is English – US. Select "Settings" > "Time & language" >
"Region & language" from the Windows
boards.
Windows 7: select "Control Panel" > "Clock, Language, and Region" > "Region and
Language" > "Keyboards and Languages" from the Windows
the keyboard properties.
To access Windows
3.1.11.3 Connecting a mouse
A USB mouse can be connected to any of the USB connectors. After being auto-detec-
ted by the operating system, it can safely be disconnected and reconnected even dur-
ing measurements.
Mouse configuration
Select "Settings" > "Devices" > "Mouse & touchpad" from the Windows
to configure the mouse properties.
Windows 7: select "Control Panel" > "Hardware and Sound" > "Devices and Printers" >
"Mouse" from the Windows
To access Windows
3.1.11.4 Connecting a printer
A printer can be connected to any of the USB connectors. After successful installation,
it can safely be disconnected and reconnected even during measurements.
Before printing (System – [Print]), the analyzer checks whether a printer is connected
and turned on and whether the appropriate printer driver is installed.
Printer driver installation
If necessary, the printer driver installation is initiated using the operating system's "Add
Printer Wizard". The wizard is self-explanatory. A printer driver must be installed only
once.
User Manual 1173.9163.02 ─ 62
®
Start menu to manage languages and key-
®
, use the button in the
®
"Start" menu to configure the mouse properties.
®
, use the button in the
® Start menu to configure
toolbar of the application window.
toolbar of the application window.
Getting started
Preparing for use
® "Start" menu
33