R&S ZNB Series User Manual page 970

®
R&S ZNB/ZNBT
Example:
Manual operation:
CALCulate<Ch>:PARameter:DELete <TraceName>
Deletes a trace with a specified trace name and channel.
Suffix:
<Ch>
Setting parameters:
<TraceName>
Example:
Usage:
Manual operation:
User Manual 1173.9163.02 ─ 62
CALC2:PAR:DEF:SGR 1,2
Create channel 2 and four traces to measure the two-port S-
parameters S , S , S
11 12 21
DISP:WIND:TRAC2:FEED 'Ch2_SG_S11'
DISP:WIND:TRAC3:FEED 'Ch2_SG_S12'
DISP:WIND:TRAC4:FEED 'Ch2_SG_S21'
DISP:WIND:TRAC5:FEED 'Ch2_SG_S22'
Display the four traces in the diagram no. 1.
INIT2:CONT OFF; :INIT2:IMMediate; *OPC
Perform a complete speep in channel no. 2 to ensure the traces
are completely "filled" with data.
CALC2:DATA:SGR? SDAT
Retrieve all four traces as unformatted data (real and imaginary
part at each sweep point). The analyzer first returns the com-
plete S trace, followed by the S
11
CALC2:PAR:DEL:SGR
Delete the previously created port group.
See "All S-Params" on page 286
.
Channel number.
Trace name, e.g. 'Trc4'. See "Rules for trace names" in
ter 5.5.1.3, "Trace Manager
CALCulate4:PARameter:SDEFine 'Ch4Tr1', 'S11'
Create channel 4 and a trace named Ch4Tr1 to measure the
input reflection coefficient S
CALCulate4:PAR:CAT?
Query the traces assigned to channel 4. Ch4Tr1 is the only
trace assigned to channel 4, so the response is
'CH4TR1,S11'.
CALCulate4:PARameter:SDEFine 'CH4TR2', 'S21';
SDEFine 'CH4TR3', 'S12'; SDEFine 'CH4TR4',
'S22'
Create three more traces for the remaining 2-port S-parameters.
CALCulate4:PARameter:DELete 'CH4TR1'
Delete the first created trace.
CALCulate4:PARameter:DELete:CALL
Delete the remaining three traces in channel 4.
CALCulate:PARameter:DELete:ALL
Delete all traces, including the default trace Trc1 in channel 1.
Setting only
See "Delete Trace" on page 335
Command reference
SCPI command reference
, S . The traces are not displayed.
22
, S , and S
12 21 22
dialog", on page 336.
.
11
traces.
Chap-
970