R&S ZNB Series User Manual page 25

®
R&S ZNB/ZNBT
Left = Stacked correctly
Right = Stacked incorrectly, too many products
3. NOTICE! Overheating can damage the product.
Prevent overheating as follows:
●
●
3.1.4.2 Mounting the product in a rack
To prepare the rack
1. Observe the requirements and instructions in
2. NOTICE! Insufficient airflow can cause overheating and damage the product.
Design and implement an efficient ventilation concept for the rack.
To mount the R&S ZNB/ZNBT in a rack
1. Use an adapter kit to prepare the R&S ZNB/ZNBT for rack mounting.
a) Order the rack adapter kit R&S ZZA-KN5 (order number 1175.3040.00).
b) Mount the adapter kit. Follow the assembly instructions provided with the
2. Lift the R&S ZNB/ZNBT to shelf height.
3. Grab the handles and push the R&S ZNB/ZNBT onto the shelf until the rack brack-
ets fit closely to the rack.
4. Tighten all screws in the rack brackets with a tightening torque of 1.2 Nm to secure
the R&S ZNB/ZNBT in the rack.
User Manual 1173.9163.02 ─ 62
Keep a minimum distance of 10 cm between the fan openings of the product
and any object in the vicinity.
Do not place the product next to heat-generating equipment such as radiators
or other products.
adapter kit.
Getting started
Preparing for use
"Setting up the product" on page 16.
25