R&S ZNB Series User Manual page 675

®
R&S ZNB/ZNBT
5.14.4 Printer Setup dialog
The "Printer Setup" dialog specifies how the diagram content of, and/or other informa-
tion on the active recall set is printed. Printer options are specified in three tabs. The
lower part of the dialog shows a preview of the print.
Access: System – [File] > "Print" > "Print..."
The HCOPy... commands provide the printer settings; see
commands",
5.14.4.1 Content tab
The "Content" tab allows you to select the diagram content to be printed.
The selected item in the " Print Charts" group specifies how the diagram area of the
active recall set is printed. Currently the following options are offered: "No Diagram at
all", "Active Diagram only", "All diagrams on one page", "All diagrams on their own
page" and "Hard copy of diagram area". The latter is a screenshot of the diagram area,
which preserves colors and layout.
Note that the " Print Charts" setting also affects the
of the
User Manual 1173.9163.02 ─ 62
on page 1126.
Print tab.
GUI reference
Chapter 7.3.7, "HCOPy
To File... and To Clipboard
File softtool
actions
675