R&S ZNB Series User Manual page 986

®
R&S ZNB/ZNBT
CALCulate<Chn>:STATistics:DOMain:USER <EvalRange>
Selects one out of 10 evaluation ranges to be configured with the
STATistics:DOMain:USER:SHOW,
USER:STARt, and
mands.
Suffix:
<Chn>
Parameters:
<EvalRange>
Example:
Manual operation:
CALCulate<Chn>:STATistics:DOMain:USER:SHOW <Boolean>
Displays or hides range limit lines for the evaluation range selected via
CALCulate<Chn>:STATistics:DOMain:USER.
Suffix:
<Chn>
Parameters:
<Boolean>
Example:
Manual operation:
CALCulate<Chn>:STATistics:DOMain:USER:STARt <Start>
CALCulate<Chn>:STATistics:DOMain:USER:STOP <Stop>
These commands define the start and stop values of the evaluation range selected via
CALCulate<Chn>:STATistics:DOMain:USER.
Suffix:
<Chn>
User Manual 1173.9163.02 ─ 62
CALCulate<Chn>:STATistics:DOMain:
CALCulate<Chn>:STATistics:DOMain:USER:STOP
.
Channel number used to identify the active trace
Number of the evaluation range.
Range: 1 to 10. In addition, 0 denotes the (non-configura-
ble) "Full Span" evaluation range.
*RST: 0
*RST; :CALC:STAT:DOM:USER?
Query the default evaluation range. The response is zero, i.e.
the evaluation range is equal to the complete sweep range
CALC:STAT:DOM:USER 1
CALC:STAT:DOM:USER:STARt 1GHZ; STOP 2GHZ; SHOW
ON
Select evaluation range no. 1 and define the evaluation range
between 1 GHz and 2 GHz. Display the range limit lines.
See "Evaluation Range"
.
Channel number used to identify the active trace
ON | OFF - range limit lines on or off.
*RST: OFF
See
CALCulate<Chn>:STATistics:DOMain:USER
See "Range Limit Lines On"
.
Channel number used to identify the active trace
Command reference
SCPI command reference
CALCulate<Chn>:
on page 360
on page 361
com-
986