R&S ZNB Series User Manual page 260

Vector network analyzers
Table of Contents

Advertisement

®
R&S
ZNB/ZNBT
noise floor of the receivers is shifted 10 dB down by reducing the attenuation in the
frontends. The trace noise for transmission measurements is also improved.
Hence, a R&S ZNB4|8 with Extended Dynamic Range option is well suited to test pas-
sive devices with high dynamic range. The extended dynamic range can also be used
to measure accurately devices with high attenuation or to measure devices with
medium attenuation using wider IF bandwidths for higher measurement speed. With 10
dB more dynamic range, measurement bandwidths can be increased by a factor of 10.
A typical production application that currently uses a sweep with 201 points with 10
kHz bandwidth and full 2-port calibration can now use 100 kHz to become significantly
faster.
Table 4-23: Extended Dynamic Range Options for R&S ZNB
Analyzer type
R&S ZNB4
R&S ZNB8
Extended Dynamic Range options are not available for R&S ZNB20|26|40|43.
Extended Dynamic Range and
Extended Dynamic Range and
To achieve the higher sensitivity, with the Extended Dynamic Range option:
See the R&S ZNB data sheet for details
Options R&S ZNBT8-B504/-B508/-B512/-B516/-B520/-B524
The Extended Dynamic Range hardware options for the R&S ZNBT8 have similar RF
properties as the Extended Dynamic Range hardware options for the R&S ZNB4 and
R&S ZNB8. See the R&S ZNBT data sheet for details.
Option R&S ZNBT8-B504 is only available with a new R&S ZNBT8. With this option,
ports 1 to 4 are equipped with Extended Dynamic Range reflectometers instead of
standard reflectometers. Options R&S ZNBT8-B508 to R&S ZNBT8-B524 are port
extensions with Dynamic Range reflectometers; see
ports (R&S ZNBT
service.
User Manual 1173.9163.02 ─ 62
2-port
R&S ZNB4-B52
R&S ZNB8-B52
The compression point (0.1 dB) is reduced
The maximum output power is reduced
only)",
on page 222. They can be retrofitted at Rohde & Schwarz
Optional extensions and accessories
Receiver step attenuators
Bias Tees
are mutually exclusive
Chapter 4.7.1, "Additional test
Concepts and features
4-port
R&S ZNB4-B54
R&S ZNB8-B54
are mutually exclusive
260

Advertisement

Table of Contents
loading

Table of Contents