R&S ZNB Series User Manual page 959

®
R&S ZNB/ZNBT
CALCulate<Chn>:MARKer<Mk>:TARGet <TargetSearchVal>
CALCulate<Chn>:MARKer<Mk>:REFerence:TARGet <TargetSearchVal>
Defines the target value for the target search of marker the related marker (see
"Marker addressing"
The target search can be activated using
FUNCtion:EXECute TARGet
FUNCtion:EXECute
Suffix:
<Chn>
<Mk>
Parameters:
<TargetSearchVal>
Example:
Manual operation:
CALCulate<Chn>:MARKer<Mk>:THReshold <Value>
CALCulate<Chn>:MARKer<Mk>:REFerence:THReshold <TargetSearchVal>
Defines a marker-specific threshold value for (single) peak searches with the related
marker (see
Use
MARKer<Mk>:REFerence:THReshold:STATe
Suffix:
<Chn>
<Mk>
Parameters:
<Value>
Manual operation:
User Manual 1173.9163.02 ─ 62
on page 940).
TARGet.
.
Channel number used to identify the active trace
Marker number (ignored for reference markers)
Target search value of marker no. <Mk>.
The value range and reset value depend on the selected target
format (see
FORMat
SEARch:FORMat).
CALC:MARK ON
Create marker no. 1 and display it in the center of the sweep
range.
:CALC:MARK:TARG -10; FUNC:EXEC TARG
Define a target search value of -10 dB and start the target
search.
CALC:MARK:X?
Query the stimulus value corresponding to the target search
result.
See
"Marker addressing"
CALCulate<Chn>:MARKer<Mk>:THReshold:STATe
.
Channel number used to identify the active trace
Marker number (ignored for reference markers)
Threshold value
The unit is derived from the active trace format and cannot be
modified. Changing the trace format resets the threshold to a
format-specific default value.
See
CALCulate<Chn>:MARKer<Mk>:
or
CALCulate<Chn>:MARKer<Mk>:REFerence:
CALCulate<Chn>:MARKer<Mk>:SEARch:
or
CALCulate<Chn>:MARKer<Mk>:REFerence:
"Target Value" on page 404
on page 940) .
"Threshold Settings" on page 401
Command reference
SCPI command reference
or
CALCulate<Chn>:
to activate it.
959