R&S ZNB Series User Manual page 826

®
R&S ZNB/ZNBT
●
Output buffer:
contains the messages the instrument returns to the controller. It is not part of the
status reporting system but determines the value of the MAV bit in the STB.
All status registers have the same internal structure, see
register.
For more information on the individual status registers, see
isters.
SRE register
The service request enable register SRE can be used as ENABle part of the STB if the
STB is structured according to SCPI. By analogy, the ESE can be used as the ENABle
part of the ESR.
6.5.1 Overview of status registers
The status registers of the R&S ZNB/ZNBT are implemented as shown below.
User Manual 1173.9163.02 ─ 62
Remote control
Status reporting system
Structure of a SCPI status
Contents of the status reg-
826