R&S ZNB Series User Manual page 319

®
R&S ZNB/ZNBT
Remote command:
[SENSe:]CDLL:LIST?
Active ← Loaded DLLs table
Allows you to de-/activate the respective plugin in the current channel. An active plugin
can be used to
Remote command:
[SENSe<Ch>:]CDLL[:STATe]
Permanent ← Loaded DLLs table
Defines the task that is selected via
Input"
A permanent task can interact with the firmware, even if it currently does not provide
any traces, e.g. for synchronized control of an external device. In contrast to the trace
mode, the permanent mode of operation is not restricted to a particular driving port.
Remote command:
[SENSe<Ch>:]CDLL:PERManent[:STATe]
Task Type ← Permanent ← Loaded DLLs table
Displays the task types implemented by the external DLL. This combo-box is only
enabled, if the DLL is marked as permanent.
Remote command:
[SENSe<Ch>:]CDLL:PERManent:TASK
Additional Input ← Permanent ← Loaded DLLs table
Specifies additional input that further specifies the permanent task to be performed by
the external DLL.
This string is processed by the external DLL, with DLL-specific syntax and semantics.
If it is malformed or inappropriate for some reason, the firmware logs and displays the
error messages that are returned by the DLL. See the docs of your DLL for details.
Remote command:
[SENSe<Ch>:]CDLL:PERManent:ADDitional
Version/Interface Version ← Loaded DLLs table
"Version" is purely informative. It reports the version of the DLL, as specified by its
developer.
"Interface Version" is the version of the plug-in SDK that was used to compile the DLL
(more precisely, the version of the interface RsVnaCustomDllInterface.h against
which it was compiled). This version can change the DLL handling of the analyzer firm-
ware.
Add / Remove
Allows you to add/remove custom plugins to/from the analyzer firmware.
A plug-in is installed as a *.zip file, containing a DLL and, possibly, some additional
files.
User Manual 1173.9163.02 ─ 62
create traces
on page 319 as permanent.
and/or can be made Permanent.
Task Type and further defined via
GUI reference
Meas softtool
"Additional
319