R&S ZNB Series User Manual page 690

®
R&S ZNB/ZNBT
Eye Diagram
The "Eye Diagram" checkbox enables the eye diagram with the current settings
(default or defined in
Remote command:
CALCulate<Chn>:EYE:STATe
Eye Diagram ...
Opens the
basic settings on the simulated digital signal generator.
Advanced Settings...
If the active trace is an eye diagram, the "Advanced Settings..." button opens the
Advanced Settings dialog
nal generator and receiver.
Display Measurements
If the active trace is an eye diagram, the "Display Measurements" button in the
Diag tab
The available results depend on the selected Modulation:
●
For NRZ modulated generator signals, the result display comprises two separate
info fields for "Basic" and "Time" results (see
default they are stacked below each other, however, they can be moved independ-
ently like any other info field.
Figure 5-75: Eye Diagram Results (NRZ Modulation)
●
For PAM modulation types, only a reduced set of "Basic" results is available.
Figure 5-76: Eye Diagram Results (PAM Modulations)
For a description of the result values, see
Remote command:
CALCulate<Chn>:EYE:MEASurement:STATe
CALCulate<Chn>:EYE:MEASurement:DATA?
User Manual 1173.9163.02 ─ 62
Eye Diagram
Eye Diagram dialog
that allows in-depth configuration of the simulated digital sig-
softtool tab toggles the display of the eye diagram results.
dialog) or disables it.
that allows to create an eye diagram and to perform
"Measurements..."
"Eye Diagram Results"
GUI reference
Applic softtool
Eye
on page 691). By
on page 231.
690