R&S ZNB Series User Manual page 799

®
R&S ZNB/ZNBT
In the "Edit" dialog, define the appropriate VNA port or "Set Unused" to delete the
matrix VNA port connection.
Remote command:
SYSTem:COMMunicate:RDEVice:SMATrix<Matr>:CONFigure:MVNA
SYSTem:COMMunicate:RDEVice:SMATrix<Matr>:CONFigure:MLVNa
Edit Test Port Connection
To edit a test port connection, tap on the corresponding port symbol.
In the "Edit" dialog, define the appropriate test port or select "Set Unused" to delete the
test port assignment. Configuration errors are displayed in balloon popups appearing
at the lower left corner of the "Switch Matrix RF Connections" dialog.
User Manual 1173.9163.02 ─ 62
GUI reference
Setup softtool
799