R&S ZNB Series User Manual page 61

®
R&S ZNB/ZNBT
The "Hard Key" panel is particularly useful if the analyzer is controlled from an external
monitor or Remote Desktop.
For the R&S ZNB, it is hidden by default, for the R&S ZNBT it is visible by default.
You can display the "Hard Key" panel using one of the following methods:
●
Select System – [Display] > "View Bar" > "Hard Key Panel".
●
Select "Display"> "View Bar" > "Hard Key Panel On" from the menu bar.
●
Select "Hard Key" from the context menu of the softtool panel.
3.3.2.7 Status bar
The status bar shows
●
the active channel
●
the current channel's sweep averaging counter (e.g. "Ch<i>: Avg 9/10"), or "Ch<i>:
Avg None" if averaging is disabled
●
the progress of the sweep
The progress bar also shows when the R&S ZNB/ZNBT prepares a sweep with
new channel settings
(See
●
the "EXT REF" symbol, if an external reference clock is used for synchronization
(see
●
a symbol for redefined S-parameters, if the physical ports have been redefined
(see
●
the switch matrix status symbol, if a switch matrix is configured
(See
User Manual 1173.9163.02 ─ 62
Chapter 4.1.4, "Sweep
"Ext Frequency" on page 776)
Chapter 5.18.5.2, "Define Physical Ports
Chapter 4.7.29, "External switch
control", on page 90)
dialog",
matrices", on page 269)
Getting started
Operating the instrument
on page 791)
61