R&S ZNB Series User Manual page 712

®
R&S ZNB/ZNBT
Access: System – [Applic] > "DUT Centric"
For 2nd generation R&S ZNB (order nos 1334.3330.*) this application was moved to a
dedicated
5.16.3.1 DUT Centric Wizard
The "DUT Centric Wizard" guides you through the measurement setup for certain fun-
damental DUT types.
Access: System – [Applic] > "Application: DUT Centric" > "DUT Centric Wizard"
The "DUT Centric Wizard" lets you proceed with the followng steps:
1. Select the "DUT Type".
Currently, this can be either "Mixer" or "Amplifier", where "Mixer" measurements
require option R&S ZNB/ZNBT-K4 (see
measurements",
of the analyzer firmware.
User Manual 1173.9163.02 ─ 62
DUT Softtool softtool (System – [DUT]).
on page 236). Other DUT types may be added in future releases
Chapter 4.7.4, "Frequency conversion
GUI reference
Applic softtool
712