R&S ZNB Series User Manual page 365

®
R&S ZNB/ZNBT
Infinite Average/Restart
"Infinite Average" enables or disables "Infinite Averaging " (default: disabled), "Restart"
starts a new averaging cycle.
Remote command:
CALCulate<Chn>:IAVerage[:STATe]
Mode
Selects the quantities to be averaged.
"Magnitude -
Phase"
Real - Imag
Remote command:
CALCulate<Chn>:IAVerage:MODE
5.5.11 Trace Data tab
Stores one or several data or memory traces to a file or loads a memory trace from a
file.
Background information
Refer to
All buttons on the "Trace Data" tab serve as "openers" for related dialogs:
●
"Import..." calls up a dialog to load a memory trace from a trace file; see
ter 5.5.11.1, "Import Complex Data
User Manual 1173.9163.02 ─ 62
Perform averaging of magnitude and phase (default) of the complex
trace value.
Perform averaging of the real and imaginary part of the complex trace
value (i.e. over the complex value itself).
Chapter 4.4.2, "Trace files", on page 151.
dialog", on page 366.
GUI reference
Trace Config softtool
Chap-
365