R&S ZNB Series User Manual page 921

®
R&S ZNB/ZNBT
Manual operation:
CALCulate:FMODel:SFD:TOTaldiffcfg <SFDPortConfig>
Tells the SFD tool about the port ordering of the test fixture.
Parameters:
<SFDPortConfig>
Manual operation:
CALCulate:FMODel... (other)
CALCulate:FMODel:DIRectory
CALCulate:FMODel:DIRectory:DEFault
CALCulate:FMODel:DIRectory:DEFault:CLEar
CALCulate:FMODel:REName
CALCulate:FMODel:DIRectory <String>
Defines the common working directory of the ISD, SFD and EZD fixture modeling tools.
Parameters:
<String>
Manual operation:
CALCulate:FMODel:DIRectory:DEFault
Resets the common working directory of the ISD, SFD, and EZD tool to its default
C:\Users\Public\Documents\Rohde-Schwarz\Vna\Embedding.
Suffix:
<Ph_pt>
Usage:
Manual operation:
CALCulate:FMODel:DIRectory:DEFault:CLEar
Deletes all files in the common default working directory of the of the ISD, SFD, and
EZD tool (C:\Users\Public\Documents\Rohde-Schwarz\Vna\Embedding).
Usage:
Manual operation:
User Manual 1173.9163.02 ─ 62
See "Apply" on page 634
ODD | NON
ODD: odd ports are on the left and even ports are on the right
NON: ports 1 to N are on the left and ports N+1 to 2·N are on
the right
See "Total Port Ordering"
........................................................................................ 921
............................................................................921
..................................................................921
..........................................................................................922
Directory path, either absolute or relative to the current directory
(MMEMory:CDIRectory).
See "Output Settings"
.
This suffix is ignored.
Event
See "Output Settings"
Event
See "Output Settings"
Command reference
SCPI command reference
on page 639
on page 628
on page 628
on page 628
921