R&S ZNB Series User Manual page 750

®
R&S ZNB/ZNBT
●
Lock screen – all control elements are locked. Pressing any front panel key on the
analyzer (or sending SYSTem:TSLock OFF) re-enables touchscreen control.
Remote command:
SYSTem:TSLock
5.18 Setup softtool
The "Setup" softtool allows you to define various system-related settings, to manage
global resources, to get system information and to execute service functions.
Access: System – [Setup]
Persistent vs. session settings
The settings in the "Setup" softtool and the configuration dialogs are global settings
and not affected by a "Preset" or shutdown of the analyzer.
5.18.1 Setup tab
Gives access to system-wide properties, settings, resources and service functions.
5.18.1.1 Controls on the Setup tab
The following buttons in the "Setup" tab open related dialogs:
●
"System Config...":
●
"Options...": "Info" dialog >
●
"Info...": "Info" dialog >
●
"Operators Check...":
●
"Execute Selftest...": "Info" dialog >
User Manual 1173.9163.02 ─ 62
System Config dialog
Options tab
Setup tab
Operators Check wizard
Selftest tab
GUI reference
Setup softtool
750