R&S ZNB Series User Manual page 294

®
R&S ZNB/ZNBT
Renormalization According to Theory of
Selects the waveguide circuit theory for renormalization. The conversion formulas of
these theories only differ if the reference impedance of at least one test port has a non-
zero imaginary part.
Refer to
Remote command:
CALCulate<Chn>:TRANsform:IMPedance:RNORmal
5.2.2 Ratios tab
Selects ratios of wave quantities as measured quantities.
Background information
Refer to
5.2.2.1 Controls on the Ratios tab
The "More Ratios..." button opens the
arbitrary
b<i> / a<j> Source Port <j>
Selects predefined complex
b .
2
User Manual 1173.9163.02 ─ 62
Chapter 4.3.2, "Reference
Chapter 4.3.5, "Wave quantities and
ratio of wave quantities.
ratios
impedances", on page 128.
ratios", on page 135.
More Ratios dialog which allows to select an
of the standard 2-port wave quantities a
GUI reference
Meas softtool
, a , b , and
1 2 1
294