R&S ZNB Series User Manual page 993

®
R&S ZNB/ZNBT
Manual operation:
CALCulate<Chn>:STATistics:RMS[:STATe] <Boolean>
CALCulate<Chn>:STATistics:SFLatness[:STATe] <Boolean>
These commands display or hide the "RMS" and the "Flatness/Gain/Slope" results in
the diagram area of trace no. <Chn>.
Suffix:
<Chn>
Parameters:
<Boolean>
Example:
Manual operation:
CALCulate<Chn>:STATistics[:STATe] <Boolean>
Displays or hides all statistical results in the diagram area of trace no. <Chn> except
the compression point results.
Tip: You can display or hide the "Min/Max/Peak-Peak", "Mean/Std Dev/RMS",
"Phase/El Length" and "Flatness/Gain/Slope" results separately; see example below.
Suffix:
<Chn>
Parameters:
<Boolean>
Example:
Manual operation:
User Manual 1173.9163.02 ─ 62
See "Min/Max/Peak-Peak, Mean/Std Dev/RMS"
.
Channel number used to identify the active trace
ON | OFF - statistical info field on or off.
*RST: OFF
See
CALCulate<Chn>:STATistics[:STATe]
See "Flatness/Gain/Slope"
.
Channel number used to identify the active trace
ON | OFF - Statistical info field on or off.
*RST: OFF
*RST; :CALC:STAT:MMPT ON
Reset the instrument, hiding all statistical results. Display the
"Min/Max/Peak-Peak" results.
CALC:STAT:MSTD ON
Display the "Mean/Std Dev" results in addition.
CALC:STAT:RMS ON
Display the "RMS" results in addition.
CALC:STAT:EPD ON
Display the "Phase/El Length" results in addition.
CALC:STAT:SFL ON
Display the "Flatness/Gain/Slope" results in addition.
CALC:STAT:STAT:AREA LEFT, TOP
For a subsequent check at the GUI or a hardcopy, move the info
field to the top left position.
...
CALC:STAT OFF
Hide all results.
See "Min/Max/Peak-Peak, Mean/Std Dev/RMS"
Command reference
SCPI command reference
on page 355
on page 357
on page 355
993