R&S ZNB Series User Manual page 868

®
R&S ZNB/ZNBT
Suffix:
<Chn>
Parameters:
<PeriodicPhase>
Options:
Manual operation:
CALCulate<Chn>:EYE:JITTer:RANDom:STDDeviation <StdDeviation>
Defines the standard deviation of the random jitter in the generator simulation of the
related eye diagram.
This command will raise an execution error if the active trace in the selected channel is
not an eye diagram.
Random jitter insertion can be enabled using
TYPE:RANDom.
Suffix:
<Chn>
Parameters:
<StdDeviation>
Options:
Manual operation:
CALCulate<Chn>:EYE:JITTer:STATe <Boolean>
Activates the jitter functionality in the generator simulation of the related eye diagram.
This command will raise an execution error if the active trace in the selected channel is
not an eye diagram.
The individual jitter sources can be selectively enabled using
●
CALCulate<Chn>:EYE:JITTer:TYPE:DIRac
●
CALCulate<Chn>:EYE:JITTer:TYPE:PERiodic
●
CALCulate<Chn>:EYE:JITTer:TYPE:RANDom
●
CALCulate<Chn>:EYE:JITTer:TYPE:USER
This command will raise an execution error if the active trace in the selected channel is
not an eye diagram.
Suffix:
<Chn>
Parameters:
<Boolean>
Options:
User Manual 1173.9163.02 ─ 62
.
Channel number used to identify the active trace
*RST: 0 deg
Default unit: deg
R&S ZNB/ZNBT-K20
See "Periodic" on page 699
.
Channel number used to identify the active trace
Default unit: s
R&S ZNB/ZNBT-K20
See "Random" on page 699
.
Channel number used to identify the active trace
*RST: OFF
R&S ZNB/ZNBT-K20
Command reference
SCPI command reference
CALCulate<Chn>:EYE:JITTer:
868