R&S ZNB Series User Manual page 677

®
R&S ZNB/ZNBT
5.14.6 More tab
The buttons on the "More" tab allow you to load simulation data or close the VNA appli-
cation.
Loading simulation data is only available for the PC firmware simulation (see
ter 4.7.31, "R&S
Load Simulation Data...
Imports simulation data into the current setup.
The analyzer opens the "Load Simulation Data" dialog that lets you select a trace file
(*.sNp, *.csv, *.dat). As an option, you can load the simulation data into the
"Active Channel Only", allowing you to analyze different simulation data in different
channels of a setup.
Tip: Using the standard
to different formats.
Config Additional Simulation Data...
Allows you to import port-specific simulation data into the current channel (firmware
simulation only; see
Opens the
Simulation Noise
Allows you to add random noise to the loaded simulation data to let the traces appear
more "realistic" (see
"Simulation Noise" is inactive.
User Manual 1173.9163.02 ─ 62
ZNXSIM", on page 278).
trace file export
Chapter 4.7.31.1, "Simulation
Configure Additional Simulation Data
Chapter 4.7.31.2, "Simulation
functionality, the loaded data can be converted
data", on page 279).
dialog.
noise", on page 280). By default,
GUI reference
File softtool
Chap-
677