R&S ZNB Series User Manual page 789

®
R&S ZNB/ZNBT
Table 5-9: Interface types for external generators and address formats
Physical Interface
interface (protocol)
(connector)
LAN VXI-11
SOCKET
GPIB GPIB0 ...
GPIB9
USB USB-VISA
LAN or USB Other
Remote command:
SYSTem:COMMunicate:RDEVice:GENerator<Gen>:DEFine
5.18.4.5 Inline Calibration Systems dialog
USB-connected Inline Calibration Controllers (ICCs) are autodetected by the analyzer
firmware.
User Manual 1173.9163.02 ─ 62
an appropriate driver file. Generator driver files (*.gen) are stored in the
Resources\ExtDev subdirectory of the analyzer's program directory.
Address
<IpAddress>
e.g. 127.0.0.0
<IpAddress>::<PortNo>
e.g.127.0.0.0::50000
<Address>
e.g. 20
<ManID>::<ProdID>::<SerialNo>
e.g. 0x0AAD::0x0047::100098
Interface-specific, e.g. for SOCKET:
TCPIP0::<IpAddress>::<PortNo>::SOCKET
For USB-VISA:
USB0::<ManID>::<ProdID>::<SerialNo>::INSTR
GUI reference
Setup softtool
Remarks
Full VISA resource string:
TCPIP[board]::<Address>[::INSTR]
LAN connection with pure TCP/IP protocol;
refer to your VISA user documentation.
Full VISA resource string:
GPIB[board]::<Address>[::INSTR]
2733 (0x0AAD) is the manufacturer ID of
Rohde & Schwarz.
71 (0x0047) is an example for a R&S prod-
uct ID (R&S SMF100A).
The serial number is device-specific.
Use complete VISA resource string.
789