R&S ZNB Series User Manual page 751

®
R&S ZNB/ZNBT
(Runs the selftest first)
●
"Service Function...":
Language
Selects the language of the graphical user interface. A message box indicates that the
vector network analyzer application needs to be restarted to activate a different lan-
guage.
English is the preinstalled language. A setup file for additional languages ("Vector Net-
work Analyzer Translation Setup") is available for download from the Rohde & Schwarz
Internet site (see
schwarz.com/firmware/znbt/). For the R&S ZNB, make sure to select the correct setup
file (32 bit or 64 bit). To check for the firmware application type, open the "About Vna"
dialog (select "Help" > "About..." from the menu bar) and watch out for the "Application
Type" property.
Remote command:
n/a
Remote Encoding
Selects the character encoding used at the remote interface. The selected encoding
applies to directory and file names, calibration kit names, calibration unit characteriza-
tions and display titles.
Currently the following encodings are supported: ANSI (default), UTF-8, Shift JIS.
Remote command:
SYSTem:COMMunicate:CODec
5.18.1.2 System Config dialog
The "System Config" dialog allows you to define global settings that are not affected by
an instrument reset. See
Access: System – [Setup] > "Setup" > "System Config..."
User Manual 1173.9163.02 ─ 62
Service Function dialog
https://www.rohde-schwarz.com/firmware/znb/
Chapter 4.1.1, "Global (persistent)
GUI reference
Setup softtool
or https://www.rohde-
settings", on page 87.
751