R&S ZNB Series User Manual page 102

®
R&S ZNB/ZNBT
4.2 Screen elements
This section describes manual operation of the analyzer, including trace settings, mark-
ers and diagrams. For a description of the different quantities measured by the instru-
ment, refer to
4.2.1 Display elements of a diagram
The central part of the screen is occupied by one or more diagrams.
A diagram is simply a rectangular portion of the screen used to display traces. Dia-
grams are independent of trace and channel settings. A diagram can contain a practi-
cally unlimited number of traces which can be assigned to different channels.
Most diagram settings are arranged in the "Display" softtool (hardkey System – [Dis-
play]). To assign traces and channels to diagrams, use the control elements on the
"Trace Config" > "Traces" and "Channel Config" > "Channels" softtool tabs (hardkeys
Trace – [Trace Config] and Channel – [Channel Config]).
Diagrams can contain:
●
A title (optional)
●
The diagram number (or label)
●
Measurement results, in particular traces and marker values (optional)
●
An indication of the basic channel and trace settings
●
Context menus providing settings which are related to a particular display element
●
Error messages
The examples in this section have been taken from Cartesian diagrams. All other dia-
gram types provide the same display elements.
User Manual 1173.9163.02 ─ 62
Chapter 4.3, "Measurement
Concepts and features
results", on page 125.
Screen elements
102