R&S ZNB Series User Manual page 547

®
R&S ZNB/ZNBT
5.12 Channel Config softtool
The "Channel Config" functions select, create and delete channels, configure the
source and receive ports of the R&S ZNB/ZNBT, and optimize the measurement proc-
ess.
Access: Channel – [Channel Config] hardkey
5.12.1 Channels tab
Allows you to create and delete channels, to modify the channel state, and to select a
channel as the active channel.
You can monitor the channel activity using the
mand and the output signals at pins 8 to 11 of the User Port connector.
Background information
Refer to
5.12.1.1 Controls on the Channels tab
The buttons in the "Channels" tab open the following dialogs:
●
"Channel Manager...": see
on page 550
●
"RFFE...": see
03",
User Manual 1173.9163.02 ─ 62
Chapter 4.1.3.3, "Active and inactive traces and
Chapter 5.12.1.2, "Channel Manager
Chapter 5.12.1.3, "RFFE Config dialog for R&S ZN-B15/-Z15 Var.
on page 551
Channel Config softtool
OUTPut<Ch>:UPORt[:VALue]
channels", on page 90.
dialog",
GUI reference
com-
547