Table of Contents
Advertisement
®
R&S
ZNB/ZNBT
CALCulate<Chn>:LIMit:SEGMent<Seg>:TYPE
CALCulate<Chn>:LIMit:SOUNd[:STATe]
CALCulate<Chn>:LIMit:STATe
CALCulate<Chn>:LIMit:STATe:AREA
CALCulate<Chn>:LIMit:TTLout<Pt>[:STATe]
CALCulate<Chn>:LIMit:CIRCle:CLEar
Resets the circle test for the active trace of channel <Chn>.
Suffix:
<Chn>
Usage:
Manual operation:
CALCulate<Chn>:LIMit:CIRCle:DATA <CenterX>, <CenterY>, <Radius>
Defines a circle limit lines by its center coordinates and its radius.
Suffix:
<Chn>
Parameters:
<CenterX>
<CenterY>
<Radius>
Example:
Manual operation:
CALCulate<Chn>:LIMit:CIRCle:DISPlay[:STATe] <Boolean>
Displays or hides the circle limit line associated to the active trace.
Suffix:
<Chn>
Parameters:
<Boolean>
User Manual 1173.9163.02 ─ 62
................................................................. 937
........................................................................... 938
.........................................................................................938
............................................................................... 939
..................................................................... 939
.
Channel number used to identify the active trace
Event
See
"Clear Test"
on page 388
.
Channel number used to identify the active trace
Range:
Virtually no restriction for center coordinates.
*RST:
0
Default unit: NN
Range:
Virtually no restriction for center coordinates.
*RST:
0
Default unit: NN
Range:
Virtually no restriction for radius (use positive val-
ues).
*RST:
1
Default unit: NN
See
CALCulate<Chn>:LIMit:CIRCle[:STATe]
See
"Radius / Center X / Center Y"
.
Channel number used to identify the active trace
ON | OFF - Circle limit line on or off.
*RST:
OFF
Command reference
SCPI command reference
on page 389
923
Advertisement
Chapters
Table of Contents
