R&S ZNB Series User Manual page 645

®
R&S ZNB/ZNBT
Remote command:
n.a.
Network
The graphical list contains all available 4-port networks (see
models for 4-port
The
selected balanced port.
The 4-port data network (symbol "D1" only) is defined by means of an s4p file (see
D2). For deembedding, the s4p file can also be generated by a third-party fixture mod-
eling tool (see
Other 2-port data-subnetworks (symbols "D1" and "D2") are defined by means of s2p
files (see Network).
The parameters of lumped elements are displayed below the graphical list.
Tip:
●
Drag and drop the network symbols in horizontal or vertical direction to switch to
the next symbol. The lumped elements and S-parameter networks ("D1", "D2") are
numbered from top to bottom.
●
Use the
in "Capacitor in parallel with resistor" circuit blocks to conductances and vice versa.
Remote command:
CALCulate<Ch>:TRANsform:VNETworks:BALanced:DEEMbedding<LogPt>:
TNDefinition
CALCulate<Ch>:TRANsform:VNETworks:BALanced:DEEMbedding<LogPt>:
PARameters:C<Cmp>
CALCulate<Ch>:TRANsform:VNETworks:BALanced:DEEMbedding<LogPt>:
PARameters:L<Cmp>
CALCulate<Ch>:TRANsform:VNETworks:BALanced:DEEMbedding<LogPt>:
PARameters:R<Cmp>
CALCulate<Ch>:TRANsform:VNETworks:BALanced:DEEMbedding<LogPt>:
PARameters:G<Cmp>
CALCulate<Ch>:TRANsform:VNETworks:BALanced:EMBedding<LogPt>:
TNDefinition
CALCulate<Ch>:TRANsform:VNETworks:BALanced:EMBedding<LogPt>:
PARameters:C<Cmp>
CALCulate<Ch>:TRANsform:VNETworks:BALanced:EMBedding<LogPt>:
PARameters:L<Cmp>
CALCulate<Ch>:TRANsform:VNETworks:BALanced:EMBedding<LogPt>:
PARameters:R<Cmp>
CALCulate<Ch>:TRANsform:VNETworks:BALanced:EMBedding<LogPt>:
PARameters:G<Cmp>
D1, D2
The "D1" and "D2" buttons are enabled as long as the selected
subnetworks that are defined via two-port or four-port Touchstone files (*.s2p,
*.s4p).
User Manual 1173.9163.02 ─ 62
networks", on page 212).
symbol selects "no network" and disables deembedding/embedding for the
"Fixture Tool" on page 626).
Conductance in Embedding Networks
GUI reference
Offset Embed softtool
Chapter 4.6.2.4, "Circuit
switch to change from resistances
Network comprises
D1,
645