R&S ZNB Series User Manual page 43

®
R&S ZNB/ZNBT
The keys in the NAVIGATION keypad are used to navigate within the touchscreen and
the help system, to access and control active elements.
The "Cursor Up" and "Cursor Down" keys are used to:
●
Scroll up and down in lists, e.g. among menu items, in a list of keywords, in the
Help table of contents, or in the Help index
●
Navigate between table rows in diagrams. Press "OK" to toggle between navigation
mode and data entries.
●
Increase and decrease numerical input values
"Cursor Up" (Down) become inactive as soon as the beginning of the list is reached.
"Cursor Up" (Down) is equivalent to a rotation of the rotary knob to the right (left).
The "Cursor Left" and "Cursor Right" keys are used to:
●
Move the cursor to the left or right within input fields
●
Navigate between table columns in diagrams. Press "OK" to toggle between navi-
gation mode and data entries.
●
Compress or expand menus or the Help table of contents
●
Move the highlighted item in the menu bar of the active application
ENT OK is equivalent to the action of the ENTER key in the DATA ENTRY keypad.
UNDO reverses the last action, if possible. REDO reverses the action of the UNDO
button.
3.2.1.6 Standby key
The standby toggle switch is located in the bottom-left corner of the front panel.
The key serves two main purposes:
●
Toggle between standby and ready state; see
state",
●
Shut down the instrument; see
off",
3.2.1.7 Front panel connectors
The test ports and four USB connectors are located on the front panel of the R&S ZNB.
Test ports
Numbered connectors:
●
type N female for R&S ZNB4 and R&S ZNB8
●
3.5 mm male for R&S ZNB20
●
2.92 mm (K) male for other R&S ZNB models
User Manual 1173.9163.02 ─ 62
on page 29.
on page 28.
Chapter 3.1.8, "Standby and ready
Chapter 3.1.7, "Switching the instrument on and
Getting started
Instrument tour
43