Calculate<Chn>:Eye:mask:violation:rate; Calculate<Chn>:Eye:mask:violation:tolerance; Calculate<Chn>:Eye:measurement:data - R&S ZNB Series User Manual

®
R&S ZNB/ZNBT
Parameters:
<Boolean>
Options:
Manual operation:
CALCulate<Chn>:EYE:MASK:VIOLation:RATE <ViolationRate>
Defines the violation rate (i.e. the share of bad samples) for the mask test in the related
eye diagram.
This command will raise an execution error if the active trace in the selected channel is
not an eye diagram.
This rate will only be used if
to RATE.
Suffix:
<Chn>
Parameters:
<ViolationRate>
Options:
Manual operation:
CALCulate<Chn>:EYE:MASK:VIOLation:TOLerance <ViolationTolerance>
Defines the violation tolerance (i.e. the number of bad samples) for the mask test in the
related eye diagram.
This command will raise an execution error if the active trace in the selected channel is
not an eye diagram.
This tolerance will only be used if
is set to SAMPles.
Suffix:
<Chn>
Parameters:
<ViolationTolerance>
Options:
Manual operation:
CALCulate<Chn>:EYE:MEASurement:DATA?
Returns the measurement results of the related eye diagram (see
Results"
User Manual 1173.9163.02 ─ 62
*RST:
R&S ZNB/ZNBT-K20
See "Mask Test On"
CALCulate<Chn>:EYE:MASK:FAIL:CONDition
.
Channel number used to identify the active trace
Default unit: percent
R&S ZNB/ZNBT-K20
See "Test Settings"
.
Channel number used to identify the active trace
R&S ZNB/ZNBT-K20
See "Test Settings"
on page 231).
OFF
on page 703
on page 706
CALCulate<Chn>:EYE:MASK:FAIL:CONDition
on page 706
Command reference
SCPI command reference
is set
"Eye Diagram
877